Marca | ADWITS |
---|---|
Produttore | ADWITS |
colore | NVMe to USB 3.1 -Nero |
Dimensioni del collo | 12,2 x 7,8 x 2,8 cm; 80 grammi |
Numero modello articolo | LM905 |
Fattore di forma | Custodia |
Interfaccia Hard-Disk | SCSI |
Sistema operativo | Linux, Windows Vista, iOS X 10.1, Windows XP, iOs 10, Windows, Mac |
Le batterie sono incluse | No |
Peso articolo | 80 g |
Aggiornamenti software garantiti fino a | sconosciuto |
-
-
-
-
-
-
-
VIDEO
-

Immagine non disponibile
Colore:
-
-
-
- Per visualizzare questo video scarica Flash Player
ADWITS USB 3.1 Gen2 10Gbps da Tipo C a NVMe M.2 Adattatore SSD PCIe ad alte prestazioni, custodia SSD portatile compatibile per Samsung WD ADATA, unità a stato solido DREVO M.2 NVMe-Nero
Non sappiamo se o quando l’articolo sarà di nuovo disponibile.
Dispositivi compatibili | Portatile |
Colore | NVMe to USB 3.1 -Nero |
Marchio | ADWITS |
Quantità di articoli nella confezione | 1 |
Tipo di spina elettrica | Senza spina |
Informazioni su questo articolo
- Adatta perfettamente con 22*30mm, 22*42mm, 22*60mm, 22*80mm PCIe NVMe M.2 Chiave M-SSD
- Mini formato, comodo da trasportare, facilmente plug and play, supporto hot swap
- Compatibile con Windows XP / Vista / 7 / 8 / 8.1 / 10 e Mac OS 10.1 e versioni successive, Linux
- Interfaccia: M.2 Key M per SSD NVMe (interno), USB 3.1 Gen2 tipo c per computer (esterno). Velocità di trasferimento dati fino a 10 Gbps (1250MB/s) - USB 3.1 Gen2 SuperSpeed+ (teorico)
- Due cavi USB 3.1 Gen2 da 10 Gbps inclusi: da A a C e da C a C, compatibili con i computer con porta USB-C
![]() |
I clienti che hanno visto questo articolo hanno visto anche
Confronta con articoli simili
Questo articolo ![]() ADWITS USB 3.1 Gen2 10Gbps da Tipo C a NVMe M.2 Adattatore SSD PCIe ad alte prestazioni, custodia SSD portatile compatibile per Samsung WD ADATA, unità a stato solido DREVO M.2 NVMe-Nero | Consigli | dummy | dummy | |
Riprova! Aggiunto al carrello. | Riprova! Aggiunto al carrello. | Riprova! Aggiunto al carrello. | ||
Prezzo | Attualmente non disponibile. | 21,88€21,88€ Più basso: 19,99 € | -5% 19,37€19,37€ Più basso: 20,39 € | 20,88€20,88€ Più basso: 17,27 € |
Consegna | — | Ricevilo il prima possibile il martedì 2 aprile | Ricevilo il prima possibile il martedì 2 aprile | Ricevilo il prima possibile il martedì 2 aprile |
Recensioni dei clienti | ||||
Ottimo rapporto qualità-prezzo | 3,6 | 4,6 | 4,6 | 4,0 |
Comodo | 4,2 | — | 4,8 | 5,0 |
Robustezza | — | 4,4 | 4,7 | 4,3 |
Stile | — | 4,3 | 4,7 | 4,5 |
Facile da installare | — | 4,8 | — | 4,7 |
Venduto da | — | iDsonixDirectStore | Flying-Store | ORICO Official Store |
tipo di spina elettrica | no plug | no plug | no plug | no plug |
Cerchi informazioni specifiche?
Dettagli prodotto
Specifiche prodotto
Ulteriori informazioni
ASIN | B07HM116LZ |
---|---|
Media recensioni |
4,1 su 5 stelle |
Posizione nella classifica Bestseller di Amazon | n. 121,448 in Informatica (Visualizza i Top 100 nella categoria Informatica) n. 3,186 in Adattatori per PC n. 3,599 in PenDrive |
Disponibile su Amazon.it a partire dal | 24 settembre 2018 |
Garanzia legale, diritto di recesso e politica dei resi
Feedback
Descrizione prodotto
Adwits Adattatore USB 3.1 UASP da tipo C a NVMe M.2 Adattatore PCIe SSD ad alte prestazioni
Soluzione ideale per la memorizzazione portatile di file pesanti, filmati 4K, giochi 3D, supporti RAW
AVVISO
Per rendere questo contenitore un'unità avviabile, utilizzare gli strumenti del sistema operativo per realizzarlo. Ad esempio Media Creation Tool per WIN 7/10, Utility Disco per Mac OS 10/10.5
Se il tuo SSD NVMe M.2 non viene riconosciuto correttamente e non è utile, ricostruire la tabella delle partizioni SSD con il comando "diskpart" in windows, e "Utility Disco" in Mac OS
Per creare un clone del tuo precedente SSD NVMe, fai attenzione che la dimensione del settore fisico potrebbe essere diversa. E il tuo software di clonazione potrebbe non essere in grado di accettare questo conflitto di differenze nel settore fisico e causare cloni non riusciti. È necessario provare diversi software di clonazione o utilizzare lo strumento SSM NVMe per modificare le dimensioni del settore fisico. Ad esempio Intel SSD Data Center Tool per NVMe SSD Intel
Funzioni
Masteret chipset: Jmicro USB 3.1 Gen 2 a PCIe Gen3x2 Bridge Controller
Conforme alle specifiche PCI Express Base Revisione 3.1a e NVM Express 1.3
Conforme alle specifiche USB 3.1 Gen 1 e Gen 2, classe di archiviazione di massa USB, specifica di trasporto solo bulk (revisione 1.0)
Conforme alla specifica USB UASP (Attached SCSI Protocol) (Revisione 4)
Compatibile con USB2.0/USB 3.1 Gen 1/2, supporta USB Super-Speed/High-Speed/Full-Speed
Supporta TRIM per l'SSD
Elenco pacchetti
Caso SSD USB 3.1 a PCIe NVMe x1
USB 3.1 tipo A per digitare C cavo x1
USB 3.1 tipo C per digitare C cavo x1
Kit viti x1
Recensioni clienti
Le recensioni dei clienti, comprese le valutazioni a stelle dei prodotti, aiutano i clienti ad avere maggiori informazioni sul prodotto e a decidere se è il prodotto giusto per loro.
Per calcolare la valutazione complessiva e la ripartizione percentuale per stella, non usiamo una media semplice. Piuttosto, il nostro sistema considera cose come quanto è recente una recensione e se il recensore ha acquistato l'articolo su Amazon. Ha inoltre analizzato le recensioni per verificarne l'affidabilità.
Maggiori informazioni su come funzionano le recensioni dei clienti su AmazonRecensioni con immagini

-
Migliori recensioni
Recensioni migliori da Italia
Al momento, si è verificato un problema durante il filtraggio delle recensioni. Riprova più tardi.
Nel complesso è stato sicuramente un ottimo acquisto.

Recensito in Italia il 1 gennaio 2020

ogni ca. 60 secondo da errore di I\O della periferica. Ho provato con cavi diversi , con diversi SSD e diversi pc, ho aggiornato anche il firmware ma il problema permane. Inoltre quando funziona la velocità media di scrittura è di ca.150 mb/s e quella di lettura ca 500 mb/s .
Sconsigliato.
Le recensioni migliori da altri paesi


Pro:
- no drivers needed
- sturdy material.
Con
- need screw driver to remove/insert M.2 drive.
- (my opinion) it is wide, could have reduced the width and made it more compact.
[Update after few days of use]
Con
- air vents on the sides, good but can significantly increase chances of water damage. (quick fix is to tape it, but fundamentally its a design flaw)
Recommendation:
- If you intend to use this as a replacement to pendrive, I cannot recommend this, reason being the air vents at the sides.
- if you plan to use it like an occasional m.2 reader, then yes definitely recommended.



Das Gehäuse ist vollständig aus Metall und bis auf die Kanten und den kleinen Aufdruck matt-schwarz. Es ist außenrum durchgehend abgerundet, was zu einem angenehmen Gefühl in der Hand fühlt.
Die silbern glänzenden Kanten sind leicht scharfkantig, allerdings nicht so, dass man sich daran verletzen könnte. Außerdem merkt man davon nichts mehr, sobald die Abdeckungen aufgeschraubt sind.
Die SSD lässt sich leicht einbauen, dank der Größe der Schrauben ist das allerdings etwas fummelig.
Beim Zusammenbau wackelt alles ein bisschen, sobald aber alles zu ist, hält ein Stück Schaumstoff an der hinteren Abdeckung die SSD an Ort und Stelle, sodass nichts mehr wackelt.
Der mitgelieferte Schraubenschlüssel ist billig, da habe ich allerdings auch nicht viel erwartet. Er tut, was er soll und er ist magnetisch, was bei den kleinen Schrauben sehr hilft.
Die mitgelieferten USB-Kabel (TypC zu TypC und TypC zu TypA) sind zwar kurz, wirken aber sehr hochwertig.
Es liegt außerdem eine kleine Samt-Tasche bei, die gerade groß genug ist, um den USB-"Stick" und die beiden Kabel darin zu verstauen.
Zum Thema Performance hängt ein CrystalDiskMark-Ergebnis an.
Ich verwende eine Intel 600p 1TB für den Test. Angeschlossen ist alles ASRock Z370 Pro4 an einem USB 3.1 TypA Port.
Ich persönlich bin sehr zufrieden.
Zu dem Performance-Test kann ich nicht viel sagen, da ich keine Vergleichstest mit z.B. der Samsung 970Evo (die laut Datenblatt deutlich schneller ist) angefertigt habe, aber die Kombination ist immer noch deutlich schneller als jeder handelsübliche USB-Stick. Außerdem hatte ich die SSD noch herum fliegen und so hab ich einen etwas größeren USB-"Stick", der dafür aber eine sehr große Kapazität bietet und super schnell ist.


Recensito in Germania il 14 dicembre 2018
Das Gehäuse ist vollständig aus Metall und bis auf die Kanten und den kleinen Aufdruck matt-schwarz. Es ist außenrum durchgehend abgerundet, was zu einem angenehmen Gefühl in der Hand fühlt.
Die silbern glänzenden Kanten sind leicht scharfkantig, allerdings nicht so, dass man sich daran verletzen könnte. Außerdem merkt man davon nichts mehr, sobald die Abdeckungen aufgeschraubt sind.
Die SSD lässt sich leicht einbauen, dank der Größe der Schrauben ist das allerdings etwas fummelig.
Beim Zusammenbau wackelt alles ein bisschen, sobald aber alles zu ist, hält ein Stück Schaumstoff an der hinteren Abdeckung die SSD an Ort und Stelle, sodass nichts mehr wackelt.
Der mitgelieferte Schraubenschlüssel ist billig, da habe ich allerdings auch nicht viel erwartet. Er tut, was er soll und er ist magnetisch, was bei den kleinen Schrauben sehr hilft.
Die mitgelieferten USB-Kabel (TypC zu TypC und TypC zu TypA) sind zwar kurz, wirken aber sehr hochwertig.
Es liegt außerdem eine kleine Samt-Tasche bei, die gerade groß genug ist, um den USB-"Stick" und die beiden Kabel darin zu verstauen.
Zum Thema Performance hängt ein CrystalDiskMark-Ergebnis an.
Ich verwende eine Intel 600p 1TB für den Test. Angeschlossen ist alles ASRock Z370 Pro4 an einem USB 3.1 TypA Port.
Ich persönlich bin sehr zufrieden.
Zu dem Performance-Test kann ich nicht viel sagen, da ich keine Vergleichstest mit z.B. der Samsung 970Evo (die laut Datenblatt deutlich schneller ist) angefertigt habe, aber die Kombination ist immer noch deutlich schneller als jeder handelsübliche USB-Stick. Außerdem hatte ich die SSD noch herum fliegen und so hab ich einen etwas größeren USB-"Stick", der dafür aber eine sehr große Kapazität bietet und super schnell ist.
